MP Configuration Table version 1.4 found at 0xc009dda1 Table 'FACP' at 0xbfebb700 Table 'SSDT' at 0xbfebb8b4 Table 'ECDT' at 0xbfecbb26 Table 'TCPA' at 0xbfecbb78 Table 'APIC' at 0xbfecbbaa APIC: Found table at 0xbfecbbaa APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #1: Fri Jan 14 18:01:01 MSK 2011 root@tim:/usr/obj/usr/src/sys/GENERIC i386 WARNING: WITNESS option enabled, expect reduced performance. Table 'FACP' at 0xbfebb700 Table 'SSDT' at 0xbfebb8b4 Table 'ECDT' at 0xbfecbb26 Table 'TCPA' at 0xbfecbb78 Table 'APIC' at 0xbfecbbaa Table 'MCFG' at 0xbfecbc12 Table 'HPET' at 0xbfecbc4e Table 'SLIC' at 0xbfecbdf0 Table 'BOOT' at 0xbfecbf66 Table 'ASF!' at 0xbfecbf8e Table 'SSDT' at 0xbfee271b Table 'SSDT' at 0xbfee297a Table 'SSDT' at 0xbfee2a20 Table 'SSDT' at 0xbfee2f17 ACPI: No SRAT table found Preloaded elf kernel "/boot/kernel.generic/kernel" at 0xc11b4000. Calibrating TSC clock ... TSC clock: 2493809587 Hz CPU: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (2493.81-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff Features2=0x8e3bd AMD Features=0x20100000 AMD Features2=0x1 TSC: P-state invariant Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 6144 kbytes, 16-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x00000000bc855fff, 3141730304 bytes (767024 pages) avail memory = 3139952640 (2994 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f6870 bios32: Entry = 0xfdc60 (c00fdc60) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfdbf0+0x1b7 pnpbios: Found PnP BIOS data at 0xc00f6910 pnpbios: Entry = f0000:b817 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf68c0 00024 (v02 LENOVO) ACPI: XSDT 0xbfebb647 00094 (v01 LENOVO TP-7L 00002250 LTP 00000000) ACPI: FACP 0xbfebb700 000F4 (v03 LENOVO TP-7L 00002250 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110112/tbfadt-553) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110112/tbfadt-583) ACPI: DSDT 0xbfebbb1d 10009 (v01 LENOVO TP-7L 00002250 MSFT 03000000) ACPI: FACS 0xbfee4000 00040 ACPI: SSDT 0xbfebb8b4 00269 (v01 LENOVO TP-7L 00002250 MSFT 03000000) ACPI: ECDT 0xbfecbb26 00052 (v01 LENOVO TP-7L 00002250 LNVO 00000001) ACPI: TCPA 0xbfecbb78 00032 (v02 LENOVO TP-7L 00002250 LNVO 00000001) ACPI: APIC 0xbfecbbaa 00068 (v01 LENOVO TP-7L 00002250 LNVO 00000001) ACPI: MCFG 0xbfecbc12 0003C (v01 LENOVO TP-7L 00002250 LNVO 00000001) ACPI: HPET 0xbfecbc4e 00038 (v01 LENOVO TP-7L 00002250 LNVO 00000001) ACPI: SLIC 0xbfecbdf0 00176 (v01 LENOVO TP-7L 00002250 LTP 00000000) ACPI: BOOT 0xbfecbf66 00028 (v01 LENOVO TP-7L 00002250 LTP 00000001) ACPI: ASF! 0xbfecbf8e 00072 (v16 LENOVO TP-7L 00002250 PTL 00000001) ACPI: SSDT 0xbfee271b 0025F (v01 LENOVO TP-7L 00002250 INTL 20050513) ACPI: SSDT 0xbfee297a 000A6 (v01 LENOVO TP-7L 00002250 INTL 20050513) ACPI: SSDT 0xbfee2a20 004F7 (v01 LENOVO TP-7L 00002250 INTL 20050513) ACPI: SSDT 0xbfee2f17 001D8 (v01 LENOVO TP-7L 00002250 INTL 20050513) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: io: random: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 pcibios: BIOS version 3.00 CPU0: local APIC error 0x40 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc63ed000 pa 0x1000 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/0 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 ACPI: SSDT 0xbfee1b32 00306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 0xbfee1ebd 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) cpu1: on acpi0 ACPI: SSDT 0xbfee1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 0xbfee1e38 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 Validation 0 10 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a01, revid=0x0c domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x1049, revid=0x03 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe200000, size 17, enabled map[14]: type Memory, range 32, base 0xfe225000, size 12, enabled map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2834, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe226c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe220000, size 14, enabled pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283f, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2841, revid=0x03 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2843, revid=0x03 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2845, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2847, revid=0x03 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2830, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2831, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2832, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2836, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe227000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2448, revid=0xf3 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2811, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 map[20]: type I/O Port, range 32, base 0x1830, size 4, enabled found-> vendor=0x8086, dev=0x2829, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type I/O Port, range 32, base 0x1c48, size 3, enabled map[14]: type I/O Port, range 32, base 0x1c1c, size 2, enabled map[18]: type I/O Port, range 32, base 0x1c40, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1c18, size 2, enabled map[20]: type I/O Port, range 32, base 0x1c20, size 5, enabled map[24]: type Memory, range 32, base 0xfe226000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283e, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe227400, size 8, enabled map[20]: type I/O Port, range 32, base 0x1c60, size 5, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 23 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xd4000000-0xd6ffffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0429, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd6000000, size 24, enabled pcib1: requested memory range 0xd6000000-0xd6ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xd4000000, size 25, enabled pcib1: requested memory range 0xd4000000-0xd5ffffff: good map[24]: type I/O Port, range 32, base 0x2000, size 7, enabled pcib1: requested I/O range 0x2000-0x207f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: port 0x2000-0x207f mem 0xd6000000-0xd6ffffff,0xe0000000-0xefffffff,0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1 em0: port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 em0: using IRQ 256 for MSI em0: Using an MSI interrupt acquiring duplicate lock of same type: "network driver" 1st &dev_spec->swflag_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:778 2nd &dev_spec->nvm_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:744 KDB: stack backtrace: db_trace_self_wrapper(c0cf245b,30303031,6863695f,6e616c38,373a632e,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c08ff2eb,c0cf54bc,c0cb4344,c6561fd8,c1420800,...) at kdb_backtrace+0x2a _witness_debugger(c0cf54bc,c0cb436b,c0cb4344,2e8,c0c6e097,...) at _witness_debugger+0x25 witness_checkorder(c67ab460,9,c0cb4344,2e8,0,...) at witness_checkorder+0x469 _mtx_lock_flags(c67ab460,0,c0cb4344,2e8,c142086c,...) at _mtx_lock_flags+0xc4 e1000_acquire_nvm_ich8lan(c67a7004,c67ab474,0,c0cb4344,0,...) at e1000_acquire_nvm_ich8lan+0x2e e1000_read_nvm_ich8lan(c67a7004,40,1,c1420894,7004,...) at e1000_read_nvm_ich8lan+0x59 e1000_post_phy_reset_ich8lan(c67a7004,c66b0c00,c15b0480,c14208dc,0,...) at e1000_post_phy_reset_ich8lan+0x7b4 e1000_reset_hw_ich8lan(c67a7004,c14209c0,c063705b,c67a7004,c0de5f90,...) at e1000_reset_hw_ich8lan+0x2c2 e1000_reset_hw(c67a7004,c0de5f90,1,ffffffff,ffffffff,...) at e1000_reset_hw+0x1a em_attach(c6785500,c666d85c,c0dde43c,c0cdd13b,80000000,...) at em_attach+0x142b device_attach(c6785500,4,c0cf1969,a22) at device_attach+0x36f device_probe_and_attach(c6785500,c665b400,c1420a60,c04f4f94,c6785680,...) at device_probe_and_attach+0x4e bus_generic_attach(c6785680,c673e360,1,c04f49d0,0,c6785680,0,c673e360) at bus_generic_attach+0x19 acpi_pci_attach(c6785680,c66c705c,c0dde43c,c0cdd13b,80000000,...) at acpi_pci_attach+0x194 device_attach(c6785680,4,c0cf1969,a22) at device_attach+0x36f device_probe_and_attach(c6785680,c665bc00,c1420af4,c04f6ef4,c665b400,...) at device_probe_and_attach+0x4e bus_generic_attach(c665b400,c0d25850,0,c1420ae4,c673e360,...) at bus_generic_attach+0x19 acpi_pcib_attach(c665b400,c66d6934,0,c1420b14,2,...) at acpi_pcib_attach+0x194 acpi_pcib_acpi_attach(c665b400,c666a05c,c0dde43c,c0cdd13b,80000000,...) at acpi_pcib_acpi_attach+0x246 device_attach(c665b400,4,c0cf1969,a22) at device_attach+0x36f device_probe_and_attach(c665b400,0,c1420c20,c04ebb72,c665bc00,...) at device_probe_and_attach+0x4e bus_generic_attach(c665bc00,c0de5fa0,c0d42340,3,c66d61c8,...) at bus_generic_attach+0x19 acpi_attach(c665bc00,c666405c,c0dde43c,c0cdd13b,80000000,...) at acpi_attach+0xdd2 device_attach(c665bc00,4,c0cf1969,a22) at device_attach+0x36f device_probe_and_attach(c665bc00,c665be00,c1420ca8,c0bed81e,c665be00,...) at device_probe_and_attach+0x4e bus_generic_attach(c665be00,a,c0c96a31,0) at bus_generic_attach+0x19 nexus_acpi_attach(c665be00,c66ec85c,c0dde43c,c0cdd13b,80000000,...) at nexus_acpi_attach+0x7e device_attach(c665be00,4,c0cf1969,a22) at device_attach+0x36f device_probe_and_attach(c665be00,c665c000,c665c000,c665f000,c665c000,...) at device_probe_and_attach+0x4e bus_generic_new_pass(c665c000,c6588800,c0dde36c,c0d32930,fffffff,...) at bus_generic_new_pass+0xc5 bus_set_pass(7fffffff,c1420d5c,c0bee8dc,c0e6f978,c1420d78,...) at bus_set_pass+0x81 root_bus_configure(c0e6f978,c1420d78,c087e84c,0,141ec00,...) at root_bus_configure+0x12 configure(0,141ec00,141ec00,141e000,1425000,...) at configure+0xc mi_startup() at mi_startup+0xac begin() at begin+0x2c em0: bpf attached em0: Ethernet address: 00:1e:37:8e:4d:f2 uhci0: port 0x1860-0x187f irq 20 at device 26.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 usbus0: on uhci0 usbus0: bpf attached uhci0: usbpf attached uhci1: port 0x1880-0x189f irq 21 at device 26.1 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 usbus1: on uhci1 usbus1: bpf attached uhci1: usbpf attached ehci0: mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52 usbus2: EHCI version 1.0 usbus2: on ehci0 usbus2: bpf attached ehci0: usbpf attached pci0: at device 27.0 (no driver attached) pcib2: irq 20 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xfc000000-0xfdffffff pcib2: prefetched decode 0xf8000000-0xf80fffff pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: irq 21 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x4000-0x4fff pcib3: memory decode 0xdc100000-0xdf2fffff pcib3: prefetched decode 0xdfd00000-0xdfdfffff pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x8086, dev=0x4230, revid=0x61 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdf2fe000, size 13, enabled pcib3: requested memory range 0xdf2fe000-0xdf2fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 pci3: at device 0.0 (no driver attached) pcib4: irq 22 at device 28.2 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x5000-0x5fff pcib4: memory decode 0xd8000000-0xd9ffffff pcib4: prefetched decode 0xdfa00000-0xdfafffff pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: irq 23 at device 28.3 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 12 pcib5: I/O decode 0x6000-0x6fff pcib5: memory decode 0xd0000000-0xd1ffffff pcib5: prefetched decode 0xdf700000-0xdf7fffff pci5: on pcib5 pci5: domain=0, physical bus=5 pcib6: irq 20 at device 28.4 on pci0 pcib6: domain 0 pcib6: secondary bus 13 pcib6: subordinate bus 20 pcib6: I/O decode 0x7000-0x7fff pcib6: memory decode 0xcc000000-0xcdffffff pcib6: prefetched decode 0xdf400000-0xdf4fffff pci13: on pcib6 pci13: domain=0, physical bus=13 uhci2: port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 53 usbus3: on uhci2 usbus3: bpf attached uhci2: usbpf attached uhci3: port 0x18c0-0x18df irq 17 at device 29.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54 usbus4: on uhci3 usbus4: bpf attached uhci3: usbpf attached uhci4: port 0x18e0-0x18ff irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55 usbus5: on uhci4 usbus5: bpf attached uhci4: usbpf attached ehci1: mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56 usbus6: EHCI version 1.0 usbus6: on ehci1 usbus6: bpf attached ehci1: usbpf attached pcib7: at device 30.0 on pci0 pcib7: domain 0 pcib7: secondary bus 21 pcib7: subordinate bus 24 pcib7: I/O decode 0x8000-0xbfff pcib7: no prefetched decode pcib7: Subtractively decoded bridge. pci21: on pcib7 pci21: domain=0, physical bus=21 found-> vendor=0x1180, dev=0x0476, revid=0xba domain=0, bus=21, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8100000, size 12, enabled pcib7: requested memory range 0xf8100000-0xf8100fff: good pcib7: matched entry for 21.0.INTA pcib7: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1180, dev=0x0832, revid=0x04 domain=0, bus=21, slot=0, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8101000, size 11, enabled pcib7: requested memory range 0xf8101000-0xf81017ff: good pcib7: matched entry for 21.0.INTB pcib7: slot 0 INTB hardwired to IRQ 17 found-> vendor=0x1180, dev=0x0822, revid=0x21 domain=0, bus=21, slot=0, func=2 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8101800, size 8, enabled pcib7: requested memory range 0xf8101800-0xf81018ff: good pcib7: matched entry for 21.0.INTC pcib7: slot 0 INTC hardwired to IRQ 18 found-> vendor=0x1180, dev=0x0843, revid=0x11 domain=0, bus=21, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8101c00, size 8, enabled pcib7: requested memory range 0xf8101c00-0xf8101cff: good pcib7: matched entry for 21.0.INTC pcib7: slot 0 INTC hardwired to IRQ 18 found-> vendor=0x1180, dev=0x0592, revid=0x11 domain=0, bus=21, slot=0, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8102000, size 8, enabled pcib7: requested memory range 0xf8102000-0xf81020ff: good pcib7: matched entry for 21.0.INTC pcib7: slot 0 INTC hardwired to IRQ 18 found-> vendor=0x1180, dev=0x0852, revid=0x11 domain=0, bus=21, slot=0, func=5 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8102400, size 8, enabled pcib7: requested memory range 0xf8102400-0xf81024ff: good pcib7: matched entry for 21.0.INTC pcib7: slot 0 INTC hardwired to IRQ 18 cbb0: mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 0x10: 0xf8100000 0x020000dc 0xb0181615 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x09000000 0x00f00000 0x00000003 0xb0: 0x00000000 0x60000000 0x00003000 0x00000000 0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xf8101000-0xf81017ff irq 17 at device 0.1 on pci21 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:06:1b:03:2a:20:22:0c fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:06:1b:20:22:0c fwe0: bpf attached fwe0: Ethernet address: 02:06:1b:20:22:0c fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:06:1b:03:2a:20:22:0c @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0xbc82c000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode pci21: at device 0.2 (no driver attached) pci21: at device 0.3 (no driver attached) pci21: at device 0.4 (no driver attached) pci21: at device 0.5 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0 ata0: on atapci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57 atapci1: port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0 atapci1: AHCI called from vendor specific driver atapci1: AHCI v1.10 controller with 3 1.5Gbps ports, PM not supported atapci1: Caps: 64bit NCQ SNTF ALP AL CLO 1.5Gbps PMD SSC PSC 32cmd CCC 3ports ata2: on atapci1 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000113 ata2: ready wait time=14ms ata2: software reset port 0... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata3: on atapci1 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect timeout status=00000000 ata3: AHCI reset done: phy reset found no device pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 900 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 59 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 60 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: flags 0x2000 irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 62 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00002000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: on acpi0 acpi_acad0: on acpi0 ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcefff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata1 failed to probe at port 0x170 irq 15 on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. procfs registered Timecounter "TSC" frequency 2493809587 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire battery0: acd0: setting UDMA33 battery initialization start acpi_acad0: acline initialization start ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting UDMA100 ad4: 152627MB at ata2-master UDMA100 SATA 1.5Gb/s ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered ugen0.2: at usbus0 (probe0:sbp0:0:0:0): Error 22, Unretryable error (probe1:sbp0:0:1:0): Error 22, Unretryable error (probe5:sbp0:0:5:0): Error 22, Unretryable error (probe6:sbp0:0:6:0): Error 22, Unretryable error (probe2:sbp0:0:2:0): Error 22, Unretryable error (probe3:sbp0:0:3:0): Error 22, Unretryable error (probe4:sbp0:0:4:0): Error 22, Unretryable error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 51 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 52 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 53 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad4s1a [rw]... ugen0.3: at usbus0 start_init: trying /sbin/init