Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #1: Fri Jan 14 18:01:01 MSK 2011
    root@tim:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz (2493.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Family = 6  Model = 17  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3139874816 (2994 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-7L   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110112/tbfadt-553)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110112/tbfadt-583)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-7L> on motherboard
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd6000000-0xd6ffffff,0xe0000000-0xefffffff,0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
em0: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
acquiring duplicate lock of same type: "network driver"
 1st &dev_spec->swflag_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:778
 2nd &dev_spec->nvm_mutex @ /usr/src/sys/dev/e1000/e1000_ich8lan.c:744
KDB: stack backtrace:
db_trace_self_wrapper(c0cf245b,30303031,6863695f,6e616c38,373a632e,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08ff2eb,c0cf54bc,c0cb4344,c6561fd8,c1420800,...) at kdb_backtrace+0x2a
_witness_debugger(c0cf54bc,c0cb436b,c0cb4344,2e8,c0c6e097,...) at _witness_debugger+0x25
witness_checkorder(c67c8460,9,c0cb4344,2e8,0,...) at witness_checkorder+0x469
_mtx_lock_flags(c67c8460,0,c0cb4344,2e8,c142086c,...) at _mtx_lock_flags+0xc4
e1000_acquire_nvm_ich8lan(c67c4004,c67c8474,0,c0cb4344,0,...) at e1000_acquire_nvm_ich8lan+0x2e
e1000_read_nvm_ich8lan(c67c4004,40,1,c1420894,4004,...) at e1000_read_nvm_ich8lan+0x59
e1000_post_phy_reset_ich8lan(c67c4004,c66b6c00,c15b0480,c14208dc,0,...) at e1000_post_phy_reset_ich8lan+0x7b4
e1000_reset_hw_ich8lan(c67c4004,c14209c0,c063705b,c67c4004,c0de5f90,...) at e1000_reset_hw_ich8lan+0x2c2
e1000_reset_hw(c67c4004,c0de5f90,1,ffffffff,ffffffff,...) at e1000_reset_hw+0x1a
em_attach(c67a3900,c673285c,c0dde43c,c0cdd13b,80000000,...) at em_attach+0x142b
device_attach(c67a3900,4,c0cf1969,a22) at device_attach+0x36f
device_probe_and_attach(c67a3900,c6660400,c1420a60,c04f4f94,c67a3a80,...) at device_probe_and_attach+0x4e
bus_generic_attach(c67a3a80,c675b320,1,c04f49d0,0,c67a3a80,0,c675b320) at bus_generic_attach+0x19
acpi_pci_attach(c67a3a80,c66cd85c,c0dde43c,c0cdd13b,80000000,...) at acpi_pci_attach+0x194
device_attach(c67a3a80,4,c0cf1969,a22) at device_attach+0x36f
device_probe_and_attach(c67a3a80,c6660c00,c1420af4,c04f6ef4,c6660400,...) at device_probe_and_attach+0x4e
bus_generic_attach(c6660400,c0d25850,0,c1420ae4,c675b320,...) at bus_generic_attach+0x19
acpi_pcib_attach(c6660400,c67339b4,0,c1420b14,2,...) at acpi_pcib_attach+0x194
acpi_pcib_acpi_attach(c6660400,c673805c,c0dde43c,c0cdd13b,80000000,...) at acpi_pcib_acpi_attach+0x246
device_attach(c6660400,4,c0cf1969,a22) at device_attach+0x36f
device_probe_and_attach(c6660400,0,c1420c20,c04ebb72,c6660c00,...) at device_probe_and_attach+0x4e
bus_generic_attach(c6660c00,c0de5fa0,c0d42340,3,c67a2148,...) at bus_generic_attach+0x19
acpi_attach(c6660c00,c672e85c,c0dde43c,c0cdd13b,80000000,...) at acpi_attach+0xdd2
device_attach(c6660c00,4,c0cf1969,a22) at device_attach+0x36f
device_probe_and_attach(c6660c00,c6660e00,c1420ca8,c0bed81e,c6660e00,...) at device_probe_and_attach+0x4e
bus_generic_attach(c6660e00,a,c0c96a31,0) at bus_generic_attach+0x19
nexus_acpi_attach(c6660e00,c66f385c,c0dde43c,c0cdd13b,80000000,...) at nexus_acpi_attach+0x7e
device_attach(c6660e00,4,c0cf1969,a22) at device_attach+0x36f
device_probe_and_attach(c6660e00,c6661000,c6661000,c6676000,c6661000,...) at device_probe_and_attach+0x4e
bus_generic_new_pass(c6661000,c6588800,c0dde36c,c658f528,fffffff,...) at bus_generic_new_pass+0xc5
bus_set_pass(7fffffff,c1420d5c,c0bee8dc,c0ce998b,c1420d78,...) at bus_set_pass+0x81
root_bus_configure(c0ce998b,c1420d78,c087e84c,0,141ec00,...) at root_bus_configure+0x12
configure(0,141ec00,141ec00,141e000,1425000,...) at configure+0xc
mi_startup() at mi_startup+0xac
begin() at begin+0x2c
em0: Ethernet address: 00:1e:37:8e:4d:f2
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel(R) PRO/Wireless 4965BGN> mem 0xdf2fe000-0xdf2fffff irq 17 at device 0.0 on pci3
iwn0: MIMO 2T3R, MoW2, address 00:13:e8:d9:8d:79
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib6
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib7
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xf8101000-0xf81017ff irq 17 at device 0.1 on pci21
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:20:22:0c
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:20:22:0c
fwe0: Ethernet address: 02:06:1b:20:22:0c
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:06:1b:03:2a:20:22:0c @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbc830000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
sdhci0: <RICOH R5C822 SD> mem 0xf8101800-0xf81018ff irq 18 at device 0.2 on pci21
sdhci0: 1 slot(s) allocated
pci21: <base peripheral> at device 0.3 (no driver attached)
pci21: <base peripheral> at device 0.4 (no driver attached)
pci21: <base peripheral> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 3 1.5Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 2> on atapci1
ichsmb0: <Intel 82801H (ICH8) SMBus controller> port 0x1c60-0x1c7f mem 0xfe227400-0xfe2274ff irq 23 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
acd0: DVDR <MATSHITADVD-RAM UJ-862/RB01> at ata0-master UDMA33 
ad4: 152627MB <WDC WD1600BEVS-08RST2 08.01G08> at ata2-master UDMA100 SATA 1.5Gb/s
hdac0: HDA Codec #0: Analog Devices AD1984
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: Codec #1 is not responding! Probing aborted.
pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1984 PCM #1 Digital> at cad 0 nid 1 on hdac0
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
ugen0.2: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0
(probe7:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe7:ata0:0:0:0): CAM status: SCSI Status Error
(probe7:ata0:0:0:0): SCSI status: Check Condition
(probe7:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-862 RB01> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s1a [rw]...
ugen0.3: <STMicroelectronics> at usbus0